Baby Ceratosaurus

Inspired by the Jurassic snap squad, they don't have this dinosaur, so thought I would design my own. This design does not have any moving parts but can stand without tipping over.

THIS IS NOT A PHYSICAL PRODUCT. This is an STL file and this model has been designed for 3D printing. It is hollow by design to allow the tail to be slightly heavy and the head hollow for a nice balance, so print at 100% infill to get best results and add supports to get the best results (It has 2 drain holes under the feet for to allow resin to be washed out, FDM printing still works with these holes)

*Size may vary depending on your slicing software, I make sure the height of the model is 5.8cm to be similar scale to the snap squad)

DISCLAIMER

The model has been tested and the parts print properly from a technical standpoint. There are however a hundred different other parameters that effect the outcome of a 3D print. This is the nature of 3D printing and I offer no support for the actual printing process. I've been printing for many years and I have to do a couple of prints until I hit the sweet spot. Having to adjust angles of the model & sanding the print itself is a normal part of the process for 3D printing.

Please don't post this file anywhere, I spend a lot of time making it for you to print and enjoy. Hope this design gives you joy. Be happy that you can custom paint it and you will have one of a kind.

Thanks a million for your support. More designs to come...